The Carrymaster ACP series is a low-profile, light-duty swivel leveling caster that combines a caster and a leveler in one unit. The equipment rolls into place on the wheel, then the leveler lowers a foot that takes the load off the wheel and holds the equipment still.
The series has two models, the ACP-200F with a flange plate and the ACP-200S with an M12 stem, both rated 441 lbs per caster with a 1.97 inch (50 mm) black PA6 wheel. The frame is zinc-galvanized steel, and both models come in white or black.
| Model | Load per caster | Wheel | Mount | Weight | Color |
|---|---|---|---|---|---|
| ACP-200F | 441 lbs | 1.97 in PA6 | Flange: 2.87 x 2.87 in plate, 2.28 x 2.28 in holes, 0.25 in hole | 1.23 lb | White or black |
| ACP-200S | 441 lbs | 1.97 in PA6 | Stem: M12 x 1.75 mm | 1.19 lb | White or black |
Full dimensions, including the caster height, are on each product page, with downloadable product diagrams in DWG, PDF and STP formats and a printable cut sheet.
Unlike the AC series, whose frame is die-cast aluminum, the ACP frame is steel.
The ACP series is recommended for financial instruments and equipment such as ATMs, communication equipment and other light-duty equipment that has to sit low and stand still once in place. For heavier low-profile equipment, see the twin-wheel ACT series, rated up to 882 lbs per caster.
ACP casters are priced and sold per caster. To match an ACP caster to your equipment, call our Casters and Wheels Experts at (973) 777-4922.
A. The plates match: both have a 2.87 x 2.87 in plate with a 2.28 x 2.28 in hole pattern, and the holes are 0.25 in on the ACP-200F and 0.26 in on the AC-300F.
The rating does not: the ACP-200F is rated 441 lbs per caster against 551 lbs for the AC-300F. Check your load per caster, and compare the caster heights on the two product pages, before you swap.
A. The thread matches: the ACP-200S, AC-300S and AC-600S all have an M12 x 1.75 mm stem.
The ratings differ: 441 lbs for the ACP-200S, 551 lbs for the AC-300S and 1,103 lbs for the AC-600S per caster. Only swap to the ACP if your load per caster is within 441 lbs.
A. White or black. Both the ACP-200F and the ACP-200S offer the two colors, and white is the default selection.
Choose the color on the product page before adding the caster to your cart.
A. Yes, with the Carrymaster M12/M16 Adaptor Stem, which lists the ACP-200S among the M12 casters it connects to an M16 fitting.
The adapter has an M12-1.75x20 thread on one end and an M16-2.00x50 thread on the other.
A. No. Neither ACP model has a wheel brake; the equipment is held in place by lowering the feet.
If you need a leveling caster with a wheel brake, the ALC-1000FB in our leveling casters range is the braked model.
A. The 1.97 inch wheel, offered in PA6 (WHPA00197), MC nylon (WHMC00197) and anti-static polyurethane (WHPU00197). The same size fits the AC-300, ACT-400, ACTM-400 and APLC-200F.
All three are in Wheels and Parts.
A. No. Zambus does not sell the foot as a separate part; it comes fitted to the ACP caster.
If the foot or the leveler is worn, replace the whole caster. Only the wheel is available as a separate part.
A. Yes. The twin-wheel ACT series is rated 441 lbs per caster on the ACT-400 and 882 lbs on the ACT-800, in stem and flange versions.
Compare the caster heights and mounts on the product pages before you choose, since the two series are built differently.
A. Yes. Both ACP product pages point to downloadable product diagrams in DWG, PDF and STP formats in our Resources section, plus a printable cut sheet in PDF.
The product pages also list the weight, the overall dimensions and the stem or plate size.
A. Match the mount on your equipment. Choose the ACP-200F if the frame has a flat surface for a 2.87 x 2.87 in plate, and the ACP-200S if it has an M12 threaded hole.
Both carry the same 441 lbs rating, so the choice is about the mount, not the load. Our guide to stem vs flange casters covers the trade-offs.