null

ACTM Series

Carrymaster ACTM Series Medium Duty Casters

The Carrymaster ACTM series is a low-profile, medium-duty twin-wheel caster, flange mount only, rated 441 lbs per caster. It comes as the ACTM-400 Swivel and the ACTM-400 Rigid, so a set of swivel and rigid casters can share one rating and one listed height of 2.56 in.

Both models have black PA6 twin wheels, 1.97 inches (50 mm) in diameter. The swivel has a die-cast aluminum frame on a zinc-galvanized top plate; the rigid has a zinc-galvanized steel frame. The ACTM is recommended for financial equipment such as ATMs, communication equipment, cabinets and racks.

Compare the two ACTM models

ModelTypeLoad per casterFlange plateFrameListed height
ACTM-400 Swivel Swivel 441 lbs 3.54 x 3.54 in plate, 2.76 x 2.76 in holes, 0.35 in hole Die-cast aluminum (ALDC12) 2.56 in
ACTM-400 Rigid Rigid 441 lbs 3.62 x 3.52 in plate, 2.87 x 1.77 in holes, 0.35 in hole SPC steel, zinc galvanized 2.56 in

The swivel and rigid models have different plates and hole patterns, so check both against your frame. Full dimensions are on each product page, with downloadable product diagrams in DWG, PDF and STP formats.

What the ACTM is built from

Where ACTM casters are used

The ACTM series suits medium-duty equipment that has to sit low, such as ATMs and other financial equipment, communication equipment, cabinets and racks. For guidance on how many swivel and rigid casters to use, read our guide to swivel vs rigid casters.

ACTM casters are priced and sold per caster. To match one to your equipment, call our Casters and Wheels Experts at (973) 777-4922.

People Also Ask: 10 questions about the Carrymaster ACTM series

Q. Do the ACTM-400 Swivel and ACTM-400 Rigid use the same mounting holes?

A. No. The swivel has a 3.54 x 3.54 in plate with a 2.76 x 2.76 in hole pattern. The rigid has a 3.62 x 3.52 in plate with a 2.87 x 1.77 in hole pattern. Both use 0.35 in holes.
If you are building a frame for a set of both, drill each corner for the model that goes there.

Q. What is the difference between the ACTM and the ACMT?

A. The names are close but the casters are not. The ACTM-400 is a low-profile twin-wheel caster rated 441 lbs per caster, in swivel and rigid versions.
The ACMT-600F and ACMT-800F are twin-wheel casters in the ACM series, rated 1,764 and 2,205 lbs per caster, swivel only.

Q. Can the ACTM-400 Swivel replace an ACT-400F leveling caster?

A. The plates match: both have a 3.54 x 3.54 in plate with a 2.76 x 2.76 in hole pattern and 0.35 in holes, and both are rated 441 lbs per caster. The ACTM-400 Swivel's listed height is 2.56 in, against 2.99 in for the ACT-400F.
The ACTM is a non-leveling caster: it has no leveling foot, so the equipment stands on its wheels. Only swap if the equipment does not need to be held on feet.

Q. Are both ACTM models twin-wheel casters?

A. Yes. The ACTM series banner shows both the rigid and the swivel with twin wheels.
Both are fitted with black PA6 wheels, 1.97 inches in diameter.

Q. Which replacement wheel fits the ACTM-400?

A. The 1.97 inch wheel, listed for the ACTM-400R and ACTM-400S in PA6 (WHPA00197), MC nylon (WHMC00197) and anti-static polyurethane (WHPU00197).
All three are in Wheels and Parts.

Q. What are the ACTM-400R and ACTM-400S?

A. The same two casters under the codes used in our wheel fit tables: ACTM-400R is the ACTM-400 Rigid and ACTM-400S the ACTM-400 Swivel.
Their store SKUs are ACTM0400R and ACTM0400S.

Q. Does the ACTM series have a brake?

A. No. Neither ACTM model has a brake.
If you need a braked flange caster near the same rating, the ACLMU-125SFB (418.88 lbs) and ACLMU-150SFB (485.02 lbs) have a brake that their product pages say locks the top plate and the wheel at the same time.

Q. Is there a stem-mount ACTM caster?

A. No. Both ACTM models are flange mount only.
In the non-leveling range, stem mounts are offered on the ACSU and ACLU series.

Q. How low is the ACTM caster?

A. Both ACTM models have a listed height of 2.56 in on their product pages.
For comparison, the ACT-400 leveling caster, also rated 441 lbs, has a listed height of 2.99 in. Full dimensions are on each product page.

Q. Are CAD drawings available for the ACTM series?

A. Yes. Both ACTM product pages point to downloadable product diagrams in DWG, PDF and STP formats in our Resources section.
The product pages also list the overall dimensions and the plate size and hole pattern.